weld neck flanges
"
X16CrMo5-1 니켈 합금강 플랜지 EN 10222-2WN RF 플랜지 1.7366 용접용 넥 플랜지 en1092
Grade : X16CrMo5-1 Number: 1.7366 Classification: Steel forgings for pressure purposes Standard: EN 10222-2: 2000 Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties Chemical composition % of steel X16CrMo5-1 (1.7366): EN 10222-2-2000 C Si Mn P S Cr Mo max 0.18 max 0.4 0.3 - 0.8 max 0.025 max 0.015 4 - 6 0.45 - 0.65 Mechanical properties of steel X16CrMo5-1 (1.7366) Rm - Tensile strength (MPa) (+A) 410-510 Rm -
X2CrNiMo17-12-3 용접용 넥 플랜지 1.4432 위킨 플랜지 웰드 네크 플렌지 EN1092-1 TYPE11 비 WN RF DN250*4.0 PN16
Factory Advantage: 1)Our Enterprise have certification of TUV ISO900-9001 and and Presure Equipment Directive 2014/68/EU(EN-10204 3.1/3.1B) .Including BW pipe fittings ,Forged pipe fittings and Flange . 2)We doing material of duplex steel and Nickel Alloy Steel since 2008 years . 3)Our stub end from 1/2” to 16” compression molding without welding anywhere 4)We have a wide range of products and material such as stainless steel ,duplex steel ,Nickel Alloy Steel ,Hastelloy Alloy
ASME B16.47 용접용 넥 플랜지 24 사이즈 - 60 MSS SP44 표준
FLANGES ASME B16.47 SERIES A Flanges according to ASME B16.47 A are manufactured for WN (Welding Neck) type for sizes 24” to 60”. The standard ASME B16.47 A (former MSS SP44) specifies dimensions for big size Steel flanges. The flange marking should be in accordance with MSS SP25
X2CrNi18-9 1.4307 고품질의 강철 플랜지
X2CrNi18-9(1.4307) 웰드 넥 단조 플랜지는 낮은 탄소 함량(≤0.030% C), 크롬(17.5~19.5%) 및 니켈(8~10%)로 탁월한 내식성을 제공하여 내구성과 엄격한 화학 표준 준수를 보장합니다.
1.8845 DIN 플랜지 S355MH 용접 목 플랜지 철조 Wn 플랜지
Grade : S355MH Number: 1.8845 Classification: Structural steel Standard: EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S355MH (1.8845): EN 10219-1-2006 C Si Mn Ni P S Mo V N Nb Ti Al - max 0.14 max 0.5 max 1.5 max 0.3 max 0.035 max 0.03 max 0.2 max 0.1 max 0.02 max 0.05 max 0.05 max 0.02 Cr+Cu+Mo < 0.6 Mechanical properties of steel S355MH (1.8845) Nominal
16Mo3는 강철 용접 목 플랜지 PN6 EN 1092-1 1.5415 Prirubnice S Grlom를 위조했습니다
16Mo3 Forged Steel WN Flange EN1092 PRIRUBNICE S GRLOM PN 6 EN 1092-1 TIP 11 1.5415 Steel forged flanges Grade : 16Mo3 16Mo3 Forged Steel WN Flange Number: 1.5415 Classification: Alloy special steel Density: 7.85 g/cm ³ Standard: EN 10028-2: 2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties EN 10222-2: 2000 Steel forgings for pressure purposes. Ferritic and martensitic steels with specified
36인치 A350 LF2 CL.1 600 등급 용접 목 플랜지 강화된 LWN RF 및 패드 연결
특수 플랜지 36"600 강화 LWN RF L=697mm 패드 연결(A350 LF2 CL.1 탄소강으로 제작) 중간 강도, 충격 인성 및 저온 서비스에 대한 적합성이 특징 ASME B16.5 및 EN1092 표준을 준수하고 기계 가공성과 용접성이 우수합니다.
304L 스테인리스 용접 목 플랜지 PN16 EN1092-1 ASA150 WN 플랜지
FLANGES 304/L Stainless Steel ASA150 WN flANGE PN16 EN1092-1 WN Flanges FLANGES 304/L• Sizes 1/2" to 12" (DN15 to DN300)• Higher pressures available• To BS4504 & DIN standards• PN6, 10,16, 25, 40 & ASA 150 LB & ASA300LB rated• BS EN 10204 3.1 Certificates available on request• 304 stainless steel• Larger sizes available• To ANSI/ASME B16.5 standards• To BS10 table E standards• To EN1092-1 Standards (Was BS4504) Stainless Steel Flange TestNTD ( Ultrasonic test, Eddy Current
평면 용접 목 플랜지 EN 1092-1/01 DIN 2576을 준수하는 Přivařovací příruba
Plochá přivařovací příruba EN 1092-1/01 DIN 2576
