steel plate hot rolled
"
C-22 스테인리스 스틸 플랜지 및 피팅 플레이트 시트 스트립 빌렛 바 와이어 덮인 전극
Product Name : ALLOY C-22 (UNS NO6022) - HASTELLOY® and HAYNES® are registered trademarks of Haynes International, Inc Characteristics − Ni-22Cr-13Mo-3W-3Fe alloy with better overall corrosion resistance and versatility than any Ni-Cr-Mo alloy today. Outstanding resistance to localized corrosion, stress corrosion cracking and oxidizing and reducing chemicals. Product Forms − HASTELLOY® alloy C-22 is available in the form of plate, sheet, strip, billet, bar, wire, covered
고온 롤 스틸 케이스 파이프 탄소 AISI/SAE 1018 냉면 UNS G10180 내구성
Product Name : Carbon AISI/SAE 1018 COLD FINISHED (UNS G10180) - Cold Drawn '20' Carbon Steel, available in all bar sections Characteristics − Most cold finished bars are produced by cold drawing oversize hot rolled bars through a die. The cold reduction of the bar results in significantly improved mechanical properties, with a smooth surface finish to close tolerances. The cold working of the bar likewise improves machinability, usually rated at 76. Larger bars are often
위조된 탄소강 배관 케이싱 및 배관 탄소 A105 A350 LF2 이중 A105 A350-LF2
Product Name : Carbon Cold Finished 1045 Chrome Plated Shafting Characteristics − The basic product is cold drawn, precision ground and polished AISI 1045 shafting with a seam free surface finish of RMS 25 max. The bars are then hard chrome plated by electrolytically deposited layer of chromium metal on the surface. This hard chromed surface confers the important properties of corrosion resistance and wear resistance; it is also very smooth and therefore has a low coefficient
튼튼한 합금 강철 이음새가 없는 관 직경 3-800mm 크롬에 의하여 도금되는 둥근 막대기
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm AISI 4130 is a low alloy chromium molybdenum (CrMo) steel. It has a lower carbon level than 4140 giving improved weldability and machinability. It is widely used in oil field applications Scope The specification defines the requirements for AISI 4130 hot rolled CrMo bars hardened and tempered to meet 75ksi minimum yield, 22HRc maximum, in line with API 6A U-bent tubes Standard metric dimensions EN
합금 E52100 스테인리스 스틸 핑팅 고 탄소 크롬 합금 앙일 상태
Product Name : Alloy E52100 Characteristics − This high carbon, chromium alloy is stocked in the annealed condition. − This grade is manufactured by the electric furnace process. Typically the quenched hardness is 62 to 66 HRC depending mainly upon section thickness Typical Applications − Grade E52100 is used primarily for races and balls or rollers of rolling-element (anti-friction) bearings. The grade is also suitable for parts requiring high hardness and wear resistance
고체 용액 합금 스테인리스 스틸 파이프 피팅 용접 니켈 - 구리 합금 400
Product Name : Nickel Alloys 400 Characteristics − Nickel-copper alloy 400 is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Typical Applications − Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners;
내구성 스테인레스 스틸 핑팅 니켈 구리 합금 500 우수한 부패 저항성
Product Name : ALLOY 500 (UNS N05500) Characteristics − Nickel-copper alloy 500 combines the excellent corrosion resistance characteristic of alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect
니켈 합금 C-22 스테인리스 관 이음쇠 부식 - 저항하는 Ni-22Cr-13Mo-3W-3Fe
Product Name : ALLOY 500 (UNS N05500) Characteristics − Nickel-copper alloy 500 combines the excellent corrosion resistance characteristic of alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect
수압 테스트 Lsaw 강철 튜브 AISI H13/H13 ESR 열간 작업 등급 +RURY +ZE +SZWEM +SPIRALNYM
Specialty – AISI H13 and H13 ESR - Hot Work Grades Product Name : +RURY +ZE +SZWEM +SPIRALNYM Characteristics − High hot tensile strength, hot wear resistance and toughness − Good thermal conductivity and resistance to hot cracking − Excellent machinability due to additional calcium treatment Typical Applications − Universal applicable Hot Work Tool Steel for pressure diecasting dies − Metal extrusion tools for processing light metals − Forging Dies, Moulds, Worms and
