seamless pipe steel
"
구리 니켈 합금 스테인리스 스틸 핑팅 SC71500 스테인리스 스틸 파이프 조인트
Product Name : Cu-Ni 70/30 C71500 Lap Joint (Stub End) (Sch40, Sch80, Sch120, Sch160) Wrought Carbon Steel Butt Weld Pipe Fittings Specifications governing the properties of weld fittings are: Physical and Chemical: ASTM A/SA234-WPB and WPB-X produced from plate fittings up to 24″ considered to be seamless. Fittings 26″ and higher are generally constructed from plate and welded such as ASTM A-516. Dimensional: ANSI B16.9, B16.11, B16.25, B16.28, and MSS SP-25, MSS SP-48 and
UNS S31803 1.4462 듀플렉스 스틸 파이프, F51 둥근 막대 밝은 6 인치 철강 파이프
Production Name :Duplex Stainless steel Seamless Pipes Material : 1.4462 / UNS S31803 / F51 / X2CrNiMoN22-5-3 Stainless steel 1.4462 / UNS S31803 / F51 / X2CrNiMoN22-5-3 W.Nr. 1.4462 BS 318S13 SIS 2377 UNS S 31803 AFNOR Z3CND 22-05 Az JIS SUS329J3L X2CrNiMoN22-5-3 DIN 17740 1.4462 ASTM / ASME F51 C max 0,03 Cr 21,00 - 23,00 Mo 2,50 - 3,50 Ni 4,50 - 0,60 N 0,10 - 0,22 Duplex 1.4462 belongs to the family of duplex stainless steels. This steel is characterised by its excellent
고체 용액 합금 스테인리스 스틸 파이프 피팅 용접 니켈 - 구리 합금 400
Product Name : Nickel Alloys 400 Characteristics − Nickel-copper alloy 400 is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Typical Applications − Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners;
C-22 스테인리스 스틸 플랜지 및 피팅 플레이트 시트 스트립 빌렛 바 와이어 덮인 전극
Product Name : ALLOY C-22 (UNS NO6022) - HASTELLOY® and HAYNES® are registered trademarks of Haynes International, Inc Characteristics − Ni-22Cr-13Mo-3W-3Fe alloy with better overall corrosion resistance and versatility than any Ni-Cr-Mo alloy today. Outstanding resistance to localized corrosion, stress corrosion cracking and oxidizing and reducing chemicals. Product Forms − HASTELLOY® alloy C-22 is available in the form of plate, sheet, strip, billet, bar, wire, covered
P235GH는 40 TEE를 감소시키는 표준강 관 이음쇠 SCH80 1.0345 팔꿈치 TEE CS를 예정합니다
P235GH SCHEDULE 40 STANDARD STEEL PIPE FITTINGS SCH80 1.0345 ELBOW TEE CS REDUCING TEE Grade : P235GH Number: 1.0345 Classification: Non-alloy quality steel Density: 7.85 g/cm ³ Standard: EN 10028-2: 2009 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties EN 10216-2: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated
우수한 부식 저항성 듀플렉스 스테인리스 스틸 튜브 합금 400 구리 니켈 표준
Production Name : Alloy 400 Stainless nickel pipe is made from a nickel-copper alloy with high strength and excellent corrosion resistance ALLOY 400 SEAMLESS NICKEL PIPE Alloy 400 nickel pipe is made from a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, marine fixtures,
철강 파이프 건설, 파이프 라인 및 북해 및 발트 해의 조선 EN 10225: 재료 S 355 G 13 + N/G 9
Production Information : OFFSHORE - WIND POWER - ENERGY Steel pipe construction, pipelines and ship building in the North and Baltic Seas present the highest demands on material and weld seams. For these extreme demands of the wind, energy, oil and ship building industries, we stock HF and UP longitudinal welded as well as seamless steel pipe from reputed manufacturers. Pipe can be delivered from stock according to the following standards and materials: EN 10225: Material S
직접 및 나선 선 파이프 CSA Z245.1 등급 290-690 크기: 24 - 60 in (609 - 1524 mm)
Production Information : OFFSHORE - WIND POWER - ENERGY Steel pipe construction, pipelines and ship building in the North and Baltic Seas present the highest demands on material and weld seams. For these extreme demands of the wind, energy, oil and ship building industries, we stock HF and UP longitudinal welded as well as seamless steel pipe from reputed manufacturers. Pipe can be delivered from stock according to the following standards and materials: EN 10225: Material S
전기 저항 용접 (ERW) 파이프 ISO 3183 등급 L245 - L485 CSA Z245.1 등급 241-483
Production Information : OFFSHORE - WIND POWER - ENERGY Steel pipe construction, pipelines and ship building in the North and Baltic Seas present the highest demands on material and weld seams. For these extreme demands of the wind, energy, oil and ship building industries, we stock HF and UP longitudinal welded as well as seamless steel pipe from reputed manufacturers. Pipe can be delivered from stock according to the following standards and materials: EN 10225: Material S
