seamless casing pipe
"
DIN 17172:1978 StE 360.7 TM, StE 385.7 TM, 연화성 액체와 가스를 운송하는 파이프 라인을 위한 철강 파이프
Spiral weld pipes Dimensional standards EN 10220:2002 “Seamless and welded steel tubes - General tables of dimensions and masses per unit length” ISO 4200:1989 “Plain-end steel tubes, welded and seamless” CSN 42 5738:1979 “Spiral weld steel pipes” DIN 2458:1981 “Welded steel tubes” EN 10219-2:1997 “Cold formed welded structural hollow sections of non-alloy and fine grain steels” API Spec 5L:2004 “Specification for Line Pipe” GOST 8696:1974 “Electrically welded steel pipes
DIN 17172:1978 StE 415.7 TM, StE 445.7TM, StE 48 가연성 액체 및 가스 수송용 파이프라인용 강철 튜브
Spiral weld pipes Dimensional standards EN 10220:2002 “Seamless and welded steel tubes - General tables of dimensions and masses per unit length” ISO 4200:1989 “Plain-end steel tubes, welded and seamless” CSN 42 5738:1979 “Spiral weld steel pipes” DIN 2458:1981 “Welded steel tubes” EN 10219-2:1997 “Cold formed welded structural hollow sections of non-alloy and fine grain steels” API Spec 5L:2004 “Specification for Line Pipe” GOST 8696:1974 “Electrically welded steel pipes
PFP A53 수자원 코팅 철강 파이프 PE 2PE 표면 4-18mm 두께
Product Name : PFP (Polyethylene-Lined Steel Pipe for Water Supplies) This corrosion-resistant steel pipe for water supplies Coated Pipes Pipeline coating is the most consistent and successful solution for protecting ERW/Seamless pipes from corrosion, from moisture, other harmful chemicals. Coated pipes are the most viable cost effective products used for transmission of oil, gas, water and other fluids. The coating provides pipelines with a constant protective layer that
ASTM A234 WPB WPC 용접 가능한 스테인리스 스틸 파이프 피팅, 블랙 파이프 웰드 피팅
Product Name : ASTM A234 WPB WPC BUTT WELDING FITTINGS Elbow /Tee/ Reducer / Cross / Caps Ambient and Higher Temperature Service Sizes: 1/2” to 48” Larger sizes available on request. Wall Thickness: Standard Extra Heavy True and Special Schedules Configurations: 45°, 90°, and 180° Elbows (Other degrees available on request and POA) 3R Elbows - 45° & 90°, segmentable and non-segmentable. Straight Tees Reducing Tees and Elbows Concentric and Eccentric Reducers Caps and Stub
위조된 스테인레스 스틸 피팅 180 엘보 A182 F316/316L/F304/304L 자연 색상
Product Name : Cu-Ni 90/10 C70600 180 Elbow, Cap (Sch40, Sch80, Sch120, Sch160) Wrought Carbon Steel Butt Weld Pipe Fittings KS /JIS Standard : Wrought Carbon Steel Butt Weld Pipe Fittings 1) 90 Elbow, 45 Elbow (SPP/SGP, 7.9T, STD, X-S) 2) 180 Elbow, Cap (SPP/SGP) 3) Tee (SPP, SGP / 7.9T, STD, X-S) 4) Reducer (SPP, SGP / 7.9T, STD, X-S) 5) 90 Elbow, 45 Elbow (Sch40, Sch80, Sch120, Sch160) 6) 1 80 Elbow, Cap (Sch40, Sch80, Sch120, Sch160) 7) Tee (Sch40, Sch80, Sch120, Sch160)
자연적인 색깔 탄소 강철 맞대기 용접 이음쇠 KS/JIS 표준 SCH10 XXS 간격
Product Name :Carbon Steel Butt-Weld Fittings Approved: Korea – TK Bend Mexico – Tenaris/Riga KS /JIS Standard : Wrought Carbon Steel Butt Weld Pipe Fittings 1) 90 Elbow, 45 Elbow (SPP/SGP, 7.9T, STD, X-S) 2) 180 Elbow, Cap (SPP/SGP) 3) Tee (SPP, SGP / 7.9T, STD, X-S) 4) Reducer (SPP, SGP / 7.9T, STD, X-S) 5) 90 Elbow, 45 Elbow (Sch40, Sch80, Sch120, Sch160) 6) 180 Elbow, Cap (Sch40, Sch80, Sch120, Sch160) 7) Tee (Sch40, Sch80, Sch120, Sch160) 8) Reducer (Sch40, Sch80, Sch120
C-22 스테인리스 스틸 플랜지 및 피팅 플레이트 시트 스트립 빌렛 바 와이어 덮인 전극
Product Name : ALLOY C-22 (UNS NO6022) - HASTELLOY® and HAYNES® are registered trademarks of Haynes International, Inc Characteristics − Ni-22Cr-13Mo-3W-3Fe alloy with better overall corrosion resistance and versatility than any Ni-Cr-Mo alloy today. Outstanding resistance to localized corrosion, stress corrosion cracking and oxidizing and reducing chemicals. Product Forms − HASTELLOY® alloy C-22 is available in the form of plate, sheet, strip, billet, bar, wire, covered
ASME B16.9 Butt 웰드 피팅 에센트릭 무선 304 Butt 웰드 파이프 줄기
Product Name :Eccentric reducer seamless with Butt welding fittings Standard : ASME B16.9 Material : 304(L) Nominal Pipe Size Length Weight in Pounds Nominal Pipe Size Length Weight in Pounds 1 1/4 x 1/2 2 0.42 1 1/4 x 1/2 2 0.53 1 x 3/4 2 0.36 1 x 3/4 2 0.43 1 x 1/2 2 0.36 1 x 1/2 2 0.42 3/4 x 1 1/2 1 0.21 3/4 x 1 1/2 1.5 0.25 1 1/2 x 1 1/4 2.5 0.65 1 1/2 x 1 1/4 2.5 0.78 1 1/2 x 1 2.5 0.57 1 1/2 x 1 2.5 0.72 1 1/2 x 3/4 2.5 0.56 1 1/2 x 3/4 2.5 0.65 1 1/2 x 1/2 2.5 0.56 1 1
중앙에서 끝까지 길이 강철 팔꿈치 SA234-WP22 CL 1 SEAMLESS 29 DEG. 56 MIN 15-7/16
Product Name : Kape (danca) / Caps EN10253-2 Type A / DIN 2617 Cap Standard : DIN 28011 Material : S235JRG2 KS : KOREAN INDUSTRIAL STANDARDS KSB 1522 : Steel Butt Welding Pipe Fittings for Oidinary use and Fuel Gas. KSB 1541: Steel Butt Welding Pipe Fittings. KSB 1542 : Steel Socket Welding Pipe Fittings. KSB 1543 : Steel Plate Butt Welding Pipe Fittings. JIS : JAPANESE INDUSTRIAL STANDARDS JIS B2311 : Steel Butt Welding Pipe Fittings for Ordinary use. JIS B2312: Steel Butt
