epoxy coated gas pipe
"
A1 2005 Uing-Oing 수중 아크 용접 파이프 15mm - 1626mm 외경 비 합금 /합금강
1. Product Description Longitudinal edges of steel plates are first beveled using carbide milling equipment. Beveled plates are then formed into a U shape using a U-press and subsequently into an O shape using an O-press. The UOE mill features the most advanced technology and process, achieves high production efficiency, stable product quality and is equipped with complete inspection equipments. UOE mill adopts U & O forming, the formed pipes are welded inside through five
PN 79 H 74244 G235 UOE 철강 파이프, 벽 두께의 나선형 철강 파이프
Spiral weld pipes Dimensional standards EN 10220:2002 “Seamless and welded steel tubes - General tables of dimensions and masses per unit length” ISO 4200:1989 “Plain-end steel tubes, welded and seamless” CSN 42 5738:1979 “Spiral weld steel pipes” DIN 2458:1981 “Welded steel tubes” EN 10219-2:1997 “Cold formed welded structural hollow sections of non-alloy and fine grain steels” API Spec 5L:2004 “Specification for Line Pipe” GOST 8696:1974 “Electrically welded steel pipes
X52 Nace MR0175 Incoloy 파이프 강철 API 사양 5L 2004 라인 파이프 사양
LSAW Steel Pipe Character Summary: Longitudinally Submerged Arc Welding (LSAW / SAWL) Pipe: the pipe is produced by double-side submerged arc welding and expanded diameter. During the production used pre-welding and then precision welding process, it is stable welding process and high quality weld. Through the mechanical expansion for the whole pipe, the stress of internal pipe is small and evenly distributed, can effectively prevent the stress corrosion cracking, it is high
API 5L 360NB X42 UOE 철강 파이프 전기 융합 용접 낮은 탄소 철강
EFW steel pipe EFW is formed by rolling plate and welding the seam. The weld flash can be removed from the outside or inside surfaces using a scarfing blade. The weld zone can also be heat treated, so the seam is less visible. DSAW Double Submerged Arc Welded Pipe DSAW or Double Submerged Arc Welded Pipe derives its name from the welding process wherein the welding arc is submerged in flux while the welding takes place . Both inside and outside welds are required and are
용접 된 철강 인콜로이 파이프 배드 마무리 GOST R 52079-2003 트렁크 가스 파이프 라인
GOST R 52079-2003 Welded steel pipes for the trunk gas pipeline, oil pipelines and oil-products pipelines Production Information : Name SSAW/Spiral Welded steel pipes 2.Standard API5L, ASTMA252, ASTMA139, ASMEB36.10,AWWAC200, EN10217,EN10219,EN10224,EN10025; SY/T5037,SY/T5040,GB/T9711.1/9711.2,API 5L, GB/T3091 Anticorrosive coating:AWWAC205,AWWAC210,AWWAC222,AWWAC214 3.Outer Diameter 219-3048mm 4.Wall Thickness 5mm—30mm 5.Length 6m,12m or as per customer's requirements 6
니켈 합금 C-276 큰 지름의 철강 파이프 부패 저항 Ni-1 6Cr-1 6Mo-6Fe-4W 합금
Nickel Alloy C-276 Corrosion Resistant - Hastelloy® Characteristics − Ni-1 6Cr-1 6Mo-6Fe-4W alloy, a highly versatile corrosion-resistant alloy. Excellent (N10276) resistance to oxidizing and reducing corrosives, acids, and chlorine-contaminated hydrocarbons. Product Forms − HASTELLOY® alloy-276 is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe and tubing. − Available in Wrought Form Corrosion Resistance − Outstanding Corrosion
AISI 01 냉공업 등급 도구 LSAW 철강 파이프 둥글 평면 판 뚫기 막대기 + 일레멘트 + 전공
Specialty – AISI 01 Cold Work Grades Tool Steels - Rounds, Flats, Plates, Drill Rod, Precision Ground Flats +Elementy +prefabrykowane Characteristics − Good edge holding ability − High hardenability, Low distortion in Heat-Treating. Typical Applications − Blanking and forming dies for short to medium production runs. − Measuring Tools, gauges, jogs and fixtures, Shear Blades AISI A2, AISI D2 Characteristics − Higher hardenability − Very low distortion in heat treatment, high
EN 10208-2; L415MB 파이프 사이즈: 508 NACE MR0175 PSL2 생산 년:2018
Spiral weld pipes Dimensional standards EN 10220:2002 “Seamless and welded steel tubes - General tables of dimensions and masses per unit length” ISO 4200:1989 “Plain-end steel tubes, welded and seamless” CSN 42 5738:1979 “Spiral weld steel pipes” DIN 2458:1981 “Welded steel tubes” EN 10219-2:1997 “Cold formed welded structural hollow sections of non-alloy and fine grain steels” API Spec 5L:2004 “Specification for Line Pipe” GOST 8696:1974 “Electrically welded steel pipes
GOST 20295-85 L사철 파이프, 수압 테스트와 함께 용접 철 파이프
GOST 20295-85 Welded steel pipes for the trunk gas and oil pipelines 3Ñï (Ê34), ñò20 (Ê42), Ê38, low-alloyed (Ê50, Ê52, Production Information : Name SSAW/Spiral Welded steel pipes 2.Standard API5L, ASTMA252, ASTMA139, ASMEB36.10,AWWAC200, EN10217,EN10219,EN10224,EN10025; SY/T5037,SY/T5040,GB/T9711.1/9711.2,API 5L, GB/T3091 Anticorrosive coating:AWWAC205,AWWAC210,AWWAC222,AWWAC214 3.Outer Diameter 219-3048mm 4.Wall Thickness 5mm—30mm 5.Length 6m,12m or as per customer's
